Add to Home Screen
No sign-up. Calculators keep working offline.
A cut off calculator turns the raw marks on your Class 12 board marksheet and entrance scorecards into the single merit figure your counselling authority actually ranks on.
This free online tool applies the verified official rules for TNEA, KCET, NEET UG, EAPCET, TNAU, KEAM, GUJCET, MHT CET and DU CUET: adjust your scores below to compute your merit score instantly with official tie-breaker guidelines.
A cut off calculator is an essential admission tool that converts the raw marks printed on your Class 12 board marksheet and entrance scorecards into the single merit figure that a state counselling authority ranks candidates on. That figure is rarely your percentage and almost never your entrance rank. It is an official weighted composite, published annually in admission brochures that vary from state to state and course to course.
For example, a student with 88 in Mathematics, 76 in Physics, and 81 in Chemistry produces a 166.5 out of 200 merit score in Tamil Nadu, a completely different composite in Karnataka, and a third scaled score in Kerala — from the identical three marks. This is why a generic formula is misleading: counselling authorities only rank on their own state-mandated formula.
Students routinely confuse these three, and the confusion is where most bad advice online begins. Your percentage is your total divided by the maximum, and it tells you almost nothing about merit because it treats every subject as equal. Your entrance score is what one test measured out of its own maximum. Your merit or cut off score is the weighted blend of the two that the authority actually sorts the merit list on. A calculator gives you the third number, and only the third number is what gets you a seat called.
On top of that sits the closing mark, the last score at which a seat was filled in a previous round. A closing mark is a historical outcome, shaped by seat availability and category reservation, not a rule you can apply to yourself. Comparing your live merit score against a previous year’s closing mark is the single most common arithmetic mistake in Indian admission planning, and it is why two calculators on two sites can both be correct and still disagree with each other.
12 calculators cover 12 separate authorities, and picking the wrong one gives you a mathematically correct answer to the wrong question. Start from your target course rather than from the exam name, because students often search by course and end up reading rules for a different branch.
The starting point. Pick the exam you actually sat, enter the marks exactly as your scorecard prints them, and the tool applies that authority’s published weighting — nothing averaged, nothing guessed.
OpenCovers TNEA, MHT CET, KCET, KEAM, GUJCET and EAPCET engineering seats. Each state weights Mathematics, Physics and Chemistry differently, so the same three marks produce six different merit scores. Search for an engineering cut off calculator by your state, not by a generic formula.
OpenThe Anna University 200-mark formula: Mathematics in full, Physics and Chemistry halved. Also the fastest way to see why a Tamil Nadu engineering aspirant cannot ignore Maths.
OpenTurns your Class 12 PCM or PCB percentages into the merit score your state actually ranks on. If you searched for a 12 cut off calculator, read this first: the answer depends entirely on the state you are applying in, and each authority weights your 12th marks differently.
OpenA step-by-step version with real numbers — 88, 76 and 81 in PCM carried all the way through the TNEA, KCET and EAPCET formulas so you can check the arithmetic line by line.
OpenTotals Physics, Chemistry and Biology out of 720 and checks the published qualifying-percentile band for your category, which is where most NEET score myths come from. A medical cut off calculator is also the fastest sanity check on a coaching institute’s number.
OpenA biology cut off calculator is the right tool for courses where Biology carries real weight: Tamil Nadu paramedical and TANUVAS veterinary both score Biology at 100 of 200, against NEET UG where Biology is 360 of 720. A biology cut off calculator will not help an engineering seat at all, because those formulas ignore Biology entirely.
OpenTamil Nadu’s paramedical and veterinary merit rules are separate from NEET. Biology at full weight plus the Physics–Chemistry average is the rule both of them use.
OpenB.Sc. (Hons.) Agriculture and allied degrees in Tamil Nadu use a four-subject halved formula out of 200 — Physics, Chemistry, Biology and Maths or Computer Science.
OpenAdmission arithmetic is decided state by state. This page collects the calculators for Tamil Nadu, Karnataka, Kerala, Gujarat, Maharashtra, Delhi and the AP–TS corridor.
OpenNo account, no OTP, no emailed report and no mark ever leaving your device — the calculation runs in your browser, so it works on a low-end phone or a patchy college network.
OpenOne place to see how your 12th percentage is used differently by TNEA, KCET, KEAM, GUJCET, EAPCET and the arts and science route — plus which of them need an entrance score too.
OpenEach calculator applies the normalisation and weighting rules published by that exam’s conducting authority — nothing generic, nothing invented.
Showing 12 verified calculators
Calculates the official 200-mark engineering cutoff score for Anna University and affiliated engineering colleges in Tamil Nadu based on 12th standard Physics, Chemistry, and Mathematics marks.
Calculates the official 200-mark agriculture merit cutoff for B.Sc. (Hons.) Agriculture, Horticulture, Forestry, and Food Nutrition admissions in TNAU and affiliated colleges.
Calculates the official 50:50 composite merit score for Karnataka Engineering admissions by combining 2nd PUC / 12th Board PCM marks (50% weightage) and KCET entrance exam PCM marks (50% weightage).
Calculates the official 75:25 composite score for AP & TS EAPCET combining 75% weightage for EAPCET entrance exam score (out of 160) and 25% weightage for Class 12 / Intermediate Group subjects.
Calculates the official 200-mark merit cutoff score for Tamil Nadu Government & Self-Financing Paramedical Degree courses including B.Pharm, B.Sc Nursing, BPT, and Allied Health Sciences.
Calculates the official 200-mark veterinary merit cutoff score for B.V.Sc & A.H. admissions in TANUVAS veterinary colleges across Tamil Nadu.
Calculates the official 50:50 KEAM engineering rank index mark out of 600, combining the 600-mark entrance paper scaled to 300 with the Class 12 board component scaled to 300 in the mandatory 5:3:2 ratio (Mathematics 150, Physics 90, Chemistry 60).
Calculates the ACPC Gujarat Engineering merit score out of 100: 60% weightage to Class 12 Board PCM theory marks and 40% weightage to the GUJCET entrance score.
Totals your NEET UG score out of 720 from subject marks and compares it against the current cycle's published 50th-percentile band and the 2025 All India Quota reference closing mark.
Calculates the official course-specific merit score for Delhi University Common Seat Allocation System (CSAS UG) based on mapped CUET subject combinations. Each CUET UG subject is 50 questions x 5 marks = 250, so a 1 Language + 3 Domain course merit is out of 1000.
Calculates your MHT CET PCM entrance score (Mathematics 100 + Physics 50 + Chemistry 50 = 200) and verifies the HSC Class 12 PCM minimum eligibility criteria for CAP counseling.
Calculates the official 400-mark cutoff score for Tamil Nadu Government Arts & Science Colleges (TNGASA) based on the 4 core major subjects in 12th standard (excluding language papers).
No signups, no waiting, and no emails. Five straightforward steps provide you with the identical merit score that your state counselling portal calculates.
Use the dropdown or the exam tabs. TNEA, KCET, NEET UG, EAPCET, TNAU, KEAM, GUJCET, MHT CET, DU CUET, paramedical, TANUVAS and TNGASA are all in one place.
Type each subject mark or your entrance score. Sliders and plus/minus steppers let you sweep a range instead of guessing a number.
The weighted merit score appears instantly, shown against the official maximum for that exam, so 84 out of 100 never gets confused with 168 out of 200.
Green means comfortably eligible, amber means borderline or a reserved-category route, red means you are under the published minimum.
Open the full page for the formula steps, category-wise eligibility, the official tie-breaking order and a link to the authority’s own website.
Most students search for a 12th cut off calculator expecting a single formula. In reality, each state counselling authority defines its own calculation. The four worked examples below take the identical three marks — 88 in Mathematics, 76 in Physics, and 81 in Chemistry — through four published state formulas so you can clearly see where each number originates.
Tamil Nadu is the simplest formula on this site and the one most people get wrong by halving the wrong subjects. Mathematics is counted in full at 100 marks; Physics and Chemistry are each halved to 50. The reason is that Tamil Nadu admits on academic ability as much as on entrance score, so the subject most predictive of an engineering student’s first-year performance keeps its maximum weight. A candidate cannot pass a weak Mathematics mark with a strong Physics score.
Your aggregate PCM percentage is checked separately. Below 40% you are not eligible at all; between 40% and 45% you are eligible only under the reserved categories in Tamil Nadu (BC, MBC, SC, ST); 45% and above clears the general condition. That gate is an eligibility filter, not part of the 200-mark score, which is why two candidates with identical totals can have different outcomes.
88 + (76 ÷ 2) + (81 ÷ 2) = 88 + 38 + 40.5 = 166.5 / 200
Merit score 166.5 / 200
Karnataka splits the weight exactly in half between your 12th board PCM total and your KCET entrance score. Your board marks are converted to a percentage out of 100 and then scaled to 50 marks; your entrance score out of 180 is scaled to 50 marks; the two are added. This structure was the point of the 2018 Karnataka High Court ruling that ended board-mark-only ranking, and it is why the same candidate who scored 166.5 in TNEA cannot simply carry that number into KCET.
Assume the same student scored 118 out of 180 in the KCET entrance paper. Board PCM total is 88 + 76 + 81 = 245 out of 300, which is 81.67%. Scaled to 50 that is 40.83. The entrance score scaled to 50 is 32.78. Karnataka also requires a board aggregate of at least 45% for the general category and 40% for reserved categories, so the gate is checked here as well.
(245 ÷ 300 × 50) + (118 ÷ 180 × 50) = 40.83 + 32.78 = 73.61 / 100
Merit score 73.61 / 100
EAPCET is the most entrance-weighted rule on this site: the 160-mark entrance paper carries 75% of the composite and the Intermediate group percentage carries 25%. A 160-mark paper is unusual in scale, which is where most hand calculations go wrong — candidates divide by 200 out of habit and end up with a score roughly a fifth too low. Telangana has in recent sessions waived the Intermediate component, so check the current brochure before relying on the 25% figure.
There is also a hard qualifying floor that has nothing to do with the composite: OC and BC candidates must score at least 40 out of 160, which is 25%. Below that, the composite is irrelevant because the candidate is not ranked at all. SC and ST candidates are exempt from the minimum. With an entrance score of 96 and an Intermediate group percentage of 81:
(96 ÷ 160 × 75) + (81 ÷ 100 × 25) = 45 + 20.25 = 65.25 / 100
Merit score 65.25 / 100
Kerala produces an index out of 600 rather than a percentage, and the board component is split 5:3:2 across Mathematics, Physics and Chemistry — the same 3:2:1 family you meet in CBSE PCM. The entrance paper out of 600 is scaled to 300, and the three board subjects are scaled to 150, 90 and 60 respectively, so the board half also totals 300. Kerala additionally normalises board marks across regions and boards before this arithmetic, which is a statistical step only the CEE can perform; use the published standardised percentage, never a raw total.
With an entrance score of 410 out of 600 and board marks of 88, 76 and 81, the index works out as follows. A minimum normalised entrance score of 10 is required just to enter the engineering rank list. It is a low bar that catches only blank or near-blank papers, but it is absolute: no index mark counts without it.
(410 ÷ 600 × 300) + (88 × 1.5) + (76 × 0.9) + (81 × 0.6) = 454 / 600
Merit score 454 / 600
This is the single most common source of confusion for Indian aspirants. A cutoff of “85” means something completely different in KCET (a 100-point composite) and in TNEA (a 200-point raw weighted score). Before you compare your score with a number quoted in a newspaper or on a college website, check which scale it is on. The table below gives the maximum score and the single weighting rule that defines each exam’s merit number.
| Exam | Max | Conducting authority | Weighting rule that defines the merit score | Open |
|---|---|---|---|---|
| TNEA Engineering | 200 / 200 | Directorate of Technical Education (DoTE), Tamil Nadu | Maths at 100%; Physics and Chemistry halved | Calculate |
| TNAU Agriculture | 200 / 200 | Tamil Nadu Agricultural University, Coimbatore | All four core subjects halved to 50 each | Calculate |
| KCET Engineering | 100 % / 100 | Karnataka Examinations Authority (KEA) | 50% 12th Board PCM + 50% KCET entrance | Calculate |
| EAPCET Cutoff | 100 / 100 | APSCHE & TGCHE | 75% EAPCET (of 160) + 25% Intermediate group % | Calculate |
| TN Paramedical | 200 / 200 | Selection Committee, Directorate of Medical Education & Research, Chennai | Biology at 100% + (Physics + Chemistry) / 2 | Calculate |
| TANUVAS Cutoff | 200 / 200 | Tamil Nadu Veterinary and Animal Sciences University, Chennai | Biology at 100% + (Physics + Chemistry) / 2 | Calculate |
| KEAM Index | 600 / 600 | Commissioner for Entrance Examinations (CEE), Kerala | 50:50 index — entrance scaled to 300 + board PCM scaled to 300 | Calculate |
| GUJCET ACPC | 100 Merit Marks / 100 | Admission Committee for Professional Courses (ACPC), Gujarat | 50% Board PCM theory + 50% GUJCET (theory only) | Calculate |
| NEET UG Medical | 720 / 720 | National Testing Agency (NTA) & National Medical Commission (NMC) | Straight total of the 720 raw marks; percentile decides merit | Calculate |
| DU CUET Merit | 1000 / 1000 | University of Delhi (CSAS UG Portal) | Sum of mapped CUET subjects (800, or 600 for B.Sc) | Calculate |
| MHT CET | 200 / 200 | State Common Entrance Test Cell, Maharashtra | Maths 100 + Physics 50 + Chemistry 50; HSC is an eligibility gate | Calculate |
| TNGASA Arts & Science | 400 / 400 | Directorate of Collegiate Education (DCE), Tamil Nadu | Four core subjects summed to 400; language papers excluded | Calculate |
| Custom / General % Mode | 100 % | No authority — your own target | No weighting; a straight comparison against a cutoff you type in | Calculate |
Custom / General % Mode is a comparison helper, not an admission formula. It exists because a growing number of private colleges and coaching institutes now quote a plain percentage requirement; use it once the official calculator is not applicable to that institution.
Admission arithmetic in India is decentralised. Each state examination board or university publishes its own merit construction, and those documents rarely agree with each other. That is not an inconsistency to be smoothed over with an average — it is a design decision, because the rank has to compare candidates who sat different papers and studied in different systems.
A raw 200-mark score. Mathematics counts in full, while Physics and Chemistry are each halved, so a maths-heavy candidate is not carried entirely by memorisation. TNAU applies the same halving but across four subjects instead of three.
A 100-point composite in which 12th Board PCM and the KCET entrance carry equal 50% weight. A candidate cannot buy a rank with board marks alone, which was the point of the 2018 High Court ruling.
A 75:25 blend of the 160-mark entrance and Intermediate group marks, plus a hard qualifying floor of 40 out of 160 for OC and BC candidates. Telangana has, in recent sessions, waived the intermediate component.
No weighting at all. Physics 180 plus Chemistry 180 plus Biology 360 gives a 720-mark total, and ranking happens through the percentile the NTA publishes rather than any composite.
All Cut Off (allcutoff.com) does not invent formulas. Every calculator here is a faithful transcription of a published government or university rule, and every calculator links you to the authority’s own website so you can verify it yourself. If a college quotes a number that does not match what its own official rule would produce, that is a question for the college — and a correction we will happily take via our contact page.
Every one of these is common, every one of them changes the answer, and every one of them is easy to check. If your score looks wrong, start here before assuming the calculator is.
A subject evaluated out of 200 entered as 184 produces a cutoff far above the maximum. Convert to a percentage out of 100 first: 184 out of 200 is 92. If the board prints a CGPA instead of marks, multiply by 10 — a 9.2 CGPA is 92%.
Almost no state ranks on a raw sum. TNEA never looks at your entrance paper at all, KCET scales both halves to 50 before adding them, and KEAM scales the entrance to 300 and the board to a 5:3:2 ratio of 300. The arithmetic must follow the scale, not intuition.
For Tamil Nadu engineering it is Physics and Chemistry that are halved and Mathematics that is kept whole. Swap them on the worked example above — 44 + 76 + 81 instead of 88 + 38 + 40.5 — and the score reads 201 out of 200, which is not a cutoff, it is an arithmetic error. TNAU halves all four subjects rather than two, so the same slip there inflates the total a different way.
The AP and TS EAPCET paper is out of 160, not 200. Dividing by 200 scales the entrance component down by a fifth and roughly a sixth off the final composite. Enter the raw score out of 160 and let the calculator do the 75% weighting.
MHT CET requires at least 150 out of 300 in HSC PCM for the open category and 120 out of 300 for reserved, EWS and PwD candidates of Maharashtra State. EAPCET requires 40 out of 160 for OC and BC. A high merit score does not override a failed gate.
These are different quantities. Your merit score is calculated from your marks; a closing mark is the last score that filled a seat last year, shaped by seat count and category reservation. Convert both to a percentage before drawing any conclusion from the gap between them.
Kerala standardises board marks across regions and boards before building the index, and some states apply normalisation in other exams too. Only the conducting authority can perform that statistical step, so enter the published standardised percentage. A raw total will be wrong from the first line of the calculation.
A merit score is an input to counselling, not an outcome. These six habits turn a calculated figure into a confident admission choice you can act on.
Most published closing marks are quoted as a raw number on the exam scale. Divide by the maximum from the table above and multiply by 100. Only percentages travel safely between portals, states and years.
Closing marks differ sharply between General and reserved categories, and often by more than the students expect. A score that looks safe in General may be far off in a reserved category with a lower cut-off pool.
If your score is close to a cluster of identical scores, the published tie-breaking order decides your rank. On most exams the first tie-breaker is a single subject, which is worth reviewing even when the total is comfortable.
Kerala, and in some sessions Telangana, standardise board marks across regions before ranking. Use the published standardised percentage, never your raw total, or your index will be wrong from the start.
Vacancies rise in later rounds. If round one was ambitious, keep the subsequent rounds open instead of assuming your score has expired. Freeze only what you are genuinely willing to accept.
Merit rules do change. Re-run your score in the calculator the moment your state publishes its next information bulletin, and compare against the previous figure rather than assuming continuity.
Clear, authoritative answers to common questions about admission cutoff calculation, Class 12 board marksheet conversion, 200 and 600-mark systems, engineering merit formulas, and closing ranks.
All Cut Off is a free, privacy-first admission calculator built specifically for Indian college admissions. It automates the exact mathematical formulas published in the official admission brochures of conducting authorities — including TNEA Anna University, KEA Karnataka, APSCHE, TGCHE, NTA NEET UG, Maharashtra CET Cell, ACPC Gujarat, and CEE Kerala. Instead of manually converting marks or relying on guesswork, students can enter their Class 12 board marks and entrance test scores to instantly calculate their verified composite cutoff score. Every calculation runs entirely in your browser with zero registration, no phone numbers, and complete privacy.
In college admissions, a cut off is the benchmark score used to determine whether an applicant qualifies for counselling or secures a seat in a specific college and branch. It takes two distinct forms: a qualifying cut off and an admission closing cut off. A qualifying cut off is the minimum score required simply to be eligible for counselling (such as the 50th percentile in NEET UG or 45% aggregate in 12th PCM for engineering). An admission cut off, or closing rank, is the final score of the last student admitted to a specific branch in a counselling round. In state engineering admissions like TNEA, cut off also refers to your own composite merit score calculated out of 200 from board marks.
To calculate your admission cut-off, you must convert your scorecard marks into the weighted composite score defined by your target counselling authority. First, identify your core group subjects (Mathematics, Physics, Chemistry for engineering; Biology, Physics, Chemistry for medical and agriculture). Second, convert each subject mark to a 100-point scale if your board scored them out of 200 or 50. Third, apply the governing authority’s formula. For example, in Tamil Nadu engineering, take Maths in full and add half of Physics and half of Chemistry: Cutoff = Maths + (Physics / 2) + (Chemistry / 2). For exams that combine entrance and board results like KCET or EAPCET, scale each component according to the published ratio (such as 50:50 or 75:25) and sum them.
Cut off in 12th refers to the composite merit score derived specifically from your Class 12 Higher Secondary (HSC / CBSE / ISC / PUC) board marks to determine undergraduate college admissions. Unlike your overall board percentage, which averages all 5 or 6 subjects including language papers (English, Tamil, Hindi, etc.), a 12th admission cut off evaluates only your core domain subjects. For engineering admissions, the 12th cut off is calculated strictly from Physics, Chemistry, and Mathematics (PCM). For medical, paramedical, and agriculture courses, it is based on Physics, Chemistry, and Biology (PCB). For arts and commerce degrees (such as TNGASA), it is calculated out of 400 by summing the top four academic subjects while discarding languages.
A 200-mark cut off is the official composite standard used for Tamil Nadu Engineering Admissions (TNEA) and Tamil Nadu Paramedical counselling. For engineering, Mathematics carries 100 marks, Physics carries 50 marks, and Chemistry carries 50 marks. The formula is: Cutoff = Maths + (Physics / 2) + (Chemistry / 2). For example, if a student scores 94 in Mathematics, 86 in Physics, and 82 in Chemistry out of 100 each, the calculation is 94 + (86 / 2) + (82 / 2) = 94 + 43 + 41 = 178.00 out of 200. For Tamil Nadu Paramedical admissions, Biology is taken out of 100 while Physics and Chemistry are averaged: Biology + ((Physics + Chemistry) / 2).
In boards like Tamil Nadu State Board HSC where the Class 12 total is 600 marks (6 subjects of 100 marks each), calculating your cut off depends on the degree you are pursuing. To calculate your overall 12th percentage, divide your total marks by 6: (Total Marks / 600) * 100. To calculate your 200-mark engineering cutoff from a 600-mark marksheet, discard Language 1, Language 2, and your fourth elective (such as Computer Science or Biology), and calculate Maths + (Physics / 2) + (Chemistry / 2). For government Arts and Science admissions (TNGASA), exclude both 100-mark language papers and sum the remaining four core subjects to get your cut off out of 400.
Engineering cut off calculation from 12th marks depends on the state conducting the counselling. In Tamil Nadu (TNEA), engineering cut off is derived entirely from 12th marks out of 200 using: Maths + (Physics / 2) + (Chemistry / 2), with no entrance exam involved. In Karnataka (KCET), 12th board PCM marks out of 300 are scaled to 50% and combined equally with your KCET entrance PCM score scaled to 50%: (Board PCM / 300 * 50) + (KCET / 180 * 50). In Andhra Pradesh and Telangana (EAPCET), 25% weightage is given to your 12th Intermediate group percentage and 75% to your EAPCET entrance score. In Maharashtra (MHT CET), 12th marks serve as a 45% qualifying eligibility gate, while the merit rank is determined by entrance percentile.
The engineering cut off calculator you should use depends directly on your target state and counselling portal. For admissions to Anna University and affiliated engineering colleges in Tamil Nadu, use the TNEA Engineering Cutoff Calculator (200-mark scale). For engineering colleges in Karnataka (such as RVCE, BMSCE, or MSRIT), use the KCET Combined Score Calculator (50:50 board-plus-entrance model). For Andhra Pradesh and Telangana state colleges, use the AP & TS EAPCET Calculator (75% entrance + 25% intermediate). For Maharashtra colleges (COEP, VJTI), use the MHT CET Calculator, and for Kerala engineering, use the KEAM 50:50 index calculator. All Cut Off provides dedicated calculators for each of these authorities so you never calculate with the wrong formula.
A cut off of 170 out of 200 (85%) is a solid, competitive score in state engineering counselling such as TNEA. In top tier-1 government institutions like Anna University CEG, MIT Campus, and GCT Coimbatore, a 170 cut off can secure core engineering branches (such as Mechanical, Civil, or Production Engineering) under reserved categories (BC, MBC, SC, ST), though Computer Science and IT in open competition typically require 190+. In reputable tier-2 autonomous and private institutions, a 170 cutoff regularly opens seats in Electronics & Communication (ECE), Electrical (EEE), Mechanical, and specialised emerging computing streams. For tier-3 accredited colleges, 170 comfortably qualifies for any branch including CSE.
A qualifying cut off is the predetermined minimum score or percentile set by an exam authority to decide whether a candidate has passed and is eligible to participate in counselling. For example, NEET UG mandates the 50th percentile for General category candidates, and MHT CET requires 45% aggregate in 12th PCM. An admission closing cut off, on the other hand, is not fixed in advance; it is the actual score or rank of the final candidate who took the last available seat in a specific college, branch, and category during counselling. Meeting the qualifying cut off makes you eligible to apply, but securing admission depends on beating the closing cut off.
Yes. Every formula on All Cut Off is transcribed from the latest official admission brochure, information bulletin, or gazette notification of the conducting body — including DoTE Tamil Nadu, KEA Karnataka, APSCHE and TGCHE, ACPC Gujarat, CEE Kerala, Maharashtra CET Cell, TNAU, TANUVAS, and NTA. Whenever an authority amends its merit rules or tie-breaking order, the corresponding calculator is updated immediately rather than left on legacy formulas.
Yes. Admission authorities rank all applicants on identical arithmetic regardless of their school board. A CBSE or ICSE student applying to TNEA or KCET is evaluated with the exact same formula as a state board candidate. The only requirement is to enter each subject mark on a 100-point scale. If your marksheet lists marks out of 50 or 200, scale them to 100 first. Where a state implements official statistical normalisation across different boards (such as KEAM Kerala), enter your published standardised mark rather than raw scorecard numbers.
Convert your marks to a percentage out of 100 before entering them into our calculators, as each subject input expects a 100-point scale. For example, if your marksheet shows 176 out of 200, divide by 2 to enter 88. If your board awards letter grades or CGPA instead of marks, convert CGPA to percentage using your board’s official multiplier (typically CGPA * 9.5 for CBSE or CGPA * 10 for universities).
No. Using a generic calculator is the most common reason students misunderstand their counselling rank. Different states use fundamentally different formulas: Tamil Nadu weights Mathematics at 100% and halves Physics and Chemistry; Karnataka splits weight 50:50 between board PCM and KCET entrance; Andhra Pradesh and Telangana assign 75% to EAPCET entrance and 25% to Intermediate group marks; Kerala applies a 5:3:2 subject ratio; and Gujarat uses 50% theory board plus 50% GUJCET. Always use the state-specific calculator matching your target counselling authority.
A calculator computes your live composite merit score from your actual marks. In contrast, cutoff tables published on college websites or coaching portals usually quote the previous year’s closing mark — the historical score at which the last seat was filled. Closing marks fluctuate every year based on exam difficulty, total applicants, and seat quotas, whereas the calculation formula remains constant. Compare your calculated merit score against the previous year’s closing range for your category to assess admission probability accurately.
No. A cutoff calculator accurately reproduces the official mathematical formula used to compute your merit score, eliminating manual calculation errors. However, final seat allotment depends on external factors decided during counselling: seat matrix availability, category-wise reservation quotas (General, OBC, SC, ST, EWS), candidate choice ordering, and official tie-breaking rules applied when multiple students achieve identical composite scores. Always treat your calculated score as your official merit score and refer to the statutory counselling portal for final allotment.
No. All Cut Off is completely free and requires no registration, login, phone number, or email address. All calculations execute client-side directly within your web browser. The marks you enter are never sent to a server, tracked, or stored in any database. The platform remains fully private and works seamlessly even on low-bandwidth connections or offline once loaded.
For each exam we start from the primary source: the information brochure, admission prospectus or official notification of the conducting body. We record the maximum score, the weighting of every component, the category-wise qualifying minimum, and the tie-breaking order in that exact order. Calculators are re-audited whenever a body revises its merit construction, and each page links directly to the authority’s own website so you can read the same clause yourself. We never publish a “predicted cutoff” dressed up as a calculated one, and we never publish a closing mark we could not source.
All Cut Off is an independent, student-run reference tool. It is not affiliated with, endorsed by, or operated by the National Testing Agency, any state examination board, or any university listed on this site. Calculated scores reproduce published arithmetic only and carry no guarantee of admission. Always confirm your figures against the official counselling portal before you act on them.